No device drivers were found when installing Windows 10 using a USB

If you are trying to install Windows 10 using a USB and encounter an error message that says “No device drivers were found,” don’t worry, you are not alone. This error message usually appears when the installation process cannot find the necessary drivers for your computer’s hardware. Here are some possible solutions to fix this issue:

1. Check your USB drive: Make sure that your USB drive is properly formatted and contains the correct Windows 10 installation files. You can download the latest version of Windows 10 from the official Microsoft website and create a bootable USB drive using the Media Creation Tool.

2. Check your BIOS settings: Sometimes, the error message can be caused by incorrect BIOS settings. Make sure that your computer’s BIOS is set to boot from the USB drive first. You can access the BIOS settings by pressing the F2 or Del key during startup.

3. Load the drivers manually: If the installation process still cannot find the necessary drivers, you can try loading them manually. You can download the drivers from your computer manufacturer’s website and save them to a separate USB drive. During the installation process, when you see the “No device drivers were found” message, click on the “Load Driver” button and select the drivers from the USB drive.

4. Use a different USB port: Sometimes, the USB port you are using may not be working properly. Try using a different USB port and see if that solves the problem.

5. Use a different USB drive: If none of the above solutions work, try using a different USB drive. Sometimes, the USB drive itself may be faulty or incompatible with your computer.

In conclusion, the “No device drivers were found” error message can be frustrating, but there are several solutions you can try to fix it. By following the above steps, you should be able to successfully install Windows 10 on your computer.


In conclusion, I hope that the solutions provided were helpful in resolving the “No device drivers were found” error message during the Windows 10 installation process. Remember to check your USB drive, BIOS settings, and try loading the drivers manually if necessary. If all else fails, try using a different USB port or drive. Good luck with your Windows 10 installation!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *